AstralPool Sena. Swimming Pool Pump
The high flow rating and low noise level of Sena pumps go hand
in hand to meet all the needs of private pools with an attractive design that is characteristic of AstralPool equipment.
A special feature of this pump version is its self-priming capacity:
at more than 2m without a foot valve.
Sena pumps are available with power ratings ranging from 1/3 HP to 1.25 HP with single-phase motors and 3/4 HP to 1.25 HP in three-phase motors, making it possible to run at 230 V and 230/400 V ± 10%, due to the use of Euro-voltage motors.
Pump Sena 1/3 HP, 7 m³/h for swimming pools up to 40 m³
Pump Sena 1/2 HP, 8.5 m³/h for swimming pools up to 50 m³
Pump Sena 3/4 HP, 9 m³/h for swimming pools up to 60 m³
Pump Sena 1 HP, 11.8 m³/h for swimming pools up to 80 m³
Pump Sena 1.25 HP, 14 m³/h for swimming pools up to 100 m³
MODEL / SIZE:
1/3 HP Single-Phase 256€
1/2 HP Single-Phase 265€
3/4 HP Single-Phase 277€
3/4 HP Three-Phase 277€
1 HP Single-Phase 284€
1 HP Three-Phase 284€
1.25 HP Single-Phase 300€
1.25 HP Three-Phase 300€
MODEL / SIZE
SAL16: <65m³ 869€
SAL22: <110m³ 987€
In slightly salty water (between 2 and 30gr NaCl/liter) generates on-line sodium hypochlorite automatically for water disinfection. It eliminates 100% the addition of chlorine, eliminates the chloramines and obtains an exempt water of smells and unpleasant flavors.
SAL16: Electrolysis 16 g/h for pools up to 65 m³
SAL22: Electrolysis 22 g/h for pools up to 110 m³
Options (both recommended):
• Measurement and control of pH of the water (electromechanical
pump + probe)
• Measurement and control of REDOX (Measurement of oxidation
of pool water and controls functionality of salt electrolysis)
HIDROLIFE Salt Electrolysis. Swimming Pool Water Treatment
Control Basic is the product preferred by most users of private pools.
Small in size, it was designed to prevent siphoning. The product requires little maintenance and is easy to install and protected by the spraying of chemical products.
The device automatically measures and regulates the pools pH/Redox.
Installation kit included. Probes and calibration solutions optional:
pH or Redox
Flow rate: 1.5 l/h or 5 l/h
Back pressure: 1.5 bar
pH measurement interval: 0.00-14.00 pH
Redox measurement interval: -999 - +999 mV
CONTROL BASIC 370€
pH control 130€
Redox control 130€
AstralPool Control Basic. Swimming Pool Water Treatment
Swimming Pool Pumps in Spain. Water Treatment for Villa Pools.